Buxly High Build Epoxy Finish EP-F-25 is an excellent chemical resistance for painting steel structures, wood and concrete, solvent/fuel storage tanks and water proofing of concrete. Matt finishes can also be used as non-skid coating. It is a two component system.
EP-F-25 is used for application on surfaces of pharmaceutical industries, hospitals, fertilizer, chemical industries, refineries, tanneries and laboratories. High Build Epoxy Coatings are resistant to acids, alkalis, sour crude oil, furnace and diesel oil, sea water, sewage water and detergents etc.
| Type | Two Pack |
| Composition | Amine adduct cured high build epoxy and weather resistant pigments in epoxy resin binder, cured with polyamide hardener |
| Mixing ratio | Component A : 3 Parts by volume Component B : 1 Parts by volume |
| Pot Life of Mixed Paints | 3–4 Hours at 25° C |
| Application | Brush/Roller/Spray |
| Drying Time | a) Surface Dry : 1 – 2 Hours b) Tack Free : 6 – 8 Hours c) Recoat : 16 – 24 Hours d) Over Coating : 7 Days |
| Complete Curing of Film | At least 96 hours, 7 days recommended |
| Average Spreading Rate | 3–5 m2 per liter |
| Dry Film Thickness | 120 + 5 Microns |
| Coats Recommended | 2–3 Coats on primed surface |
| Finish | Matt Finish |
| Volume Solids when Mixed | 55 + 5% |
| Primer | Buxly’s Epoxy Primer EP-R-10 |
| Packing | 3 Liters pack size |
| Storage Stability | Six months, when stored properly in original sealed container at 15 to 35° C |
Be the first to know: Sign up for exclusive offers, tips and more
Buxly Paints Limited shares a rich tradition of excellence in the paint industry with a history dating back to 1933 when its paints manufacturing activities started in the British India.
Website Last Updated: 26-December-2023
