Buxly Boiler Compound – 3 is specially recommended for exterior surfaces of boiler which are exposed to indirect dry heating to maximum 250°C. It can be applied on exterior surfaces of boilers, chimneys, air coolers, condensers etc.
No separate primer is necessary. Apply first coat (direct to clean steel) and work well into the surface and ensure all corners, edges, welds, nuts/bolts are covered. Do not apply a thick coat. Allow minimum interval of 16 – 18 hours before applying second coat. Subsequent coat may be applied by brush or roller.
| Type | Single Pack |
| Composition | Blend of inert bitumen and solvent |
| Application | Brush/Roller |
| Drying Time | a) Surface Dry : One Hour b) Hard Dry : Four Hours c) Recoat : 16 – 18 Hours (at room temperature) |
| Theoretical Spreading Rate | 16.5 m2 per Liter |
| Dry Film Thickness | 30 + 5 Microns per coat |
| Number of Coats | 2 Coats Minimum |
| Finish | Matt |
| Volume Solids | 50 + 2 % |
| Heat Resistance | Fully cured film resists up to 250°C dry heat |
| Thinner | Buxly’s Mixing Thinner if required |
| Packing | 5 Liters pack size |
| Storage Stability | One year when stored properly in original sealed container at 15 to 35°C |
Be the first to know: Sign up for exclusive offers, tips and more
Buxly Paints Limited shares a rich tradition of excellence in the paint industry with a history dating back to 1933 when its paints manufacturing activities started in the British India.
Website Last Updated: 26-December-2023
